How do I view hidden files in Windows? For example, C:\NTLDR and C:\NTDETECT.COM should be the locations of these files on many computers. Once this has been completed, remove the floppy diskette and reboot the computer. Below is an example of the commands that should be performed from the A:\> floppy drive to copy the files. weblink
Misconfiguration with the boot.ini file Edit the boot.ini on the root directory of the hard drive and verify that it is pointing to the correct location of your Windows operating system Computer hard drive is not properly setup in CMOS Verify that your computer hard drive is properly set up in the CMOS setup. After pressing Enter, you should receive the "System Transferred" message. copy ntldr c: copy ntdetect.com c: After the above two files have been copied, remove the floppy diskette and reboot the computer.
from the computer. At the A:\> prompt, type sys c: and press Enter. Copy the below two files to the root directory of the primary hard drive. Windows XP users Insert the Windows XP bootable CD into the computer.
Skip to Main Content Search Help Tips Dictionary History Forums Contact You are here: Help > Operating System > Microsoft Windows Help NTLDR is You will then be prompted for your administrator password. If so, try the below recommendations. Ntldr Is Missing Press Ctrl+alt+del To Restart Therefore we would recommend reinstalling Microsoft Windows.
These can be repaired through the Microsoft Windows Recovery console by running the fixboot and fixmbr commands. If you are attempting to boot from a floppy diskette and are receiving this error message, it is likely that the diskette does not have all the necessary files or is Seriously corrupted version of Windows 2000 or Windows XP If you have tried each of the above recommendations that apply to your situation and you continue to receive the NTLDR error, https://www.lifewire.com/how-to-fix-ntldr-is-missing-errors-2623859 If the above recommendation does not resolve your issue and your computer hard drive is using an IDE or EIDE interface, verify the computer hard drive cable is firmly connected by
First verify that no floppy diskette or CD is in the computer, unless you are attempting to boot from a diskette. Ntldr File Location Both of these files are located in the root directory of the primary hard drive. Additional information See the NTLDR definition for further information and related links. Log into your Windows installation by pressing the "1" key and pressing Enter.
Also, when the computer is booting, you should receive the below prompt: Press any key to boot from the CD Important: When you see this prompt, press any key on the look at this web-site If you are encountering this issue during your setup, you may want to completely erase your computer hard drive and all of its existing data and re-install Microsoft Windows. Ntldr Is Missing Windows Xp Without Cd YesNo Feedback E-mail Share Print Search Ntldr Is Missing Usb Boot If you are attempting to install Windows XP or Windows 2000 and are receiving this error message as the computer is booting, verify that your computer BIOS has the proper boot
Loose or Faulty IDE/EIDE hard drive cable This issue has been known to be caused by a loose or defective IDE/EIDE cable. have a peek at these guys Otherwise, the computer will try booting from the hard drive and likely get the NTLDR error again. Verifying the CD-ROM cables are correctly connected. Attempting to upgrade from a Windows 95, 98, or ME computer that is using FAT32 You may receive this error message when trying to upgrade to Windows 2000 or Windows XP Ntldr Is Missing Windows 10
Once in the Windows XP setup menu, press the "R" key to repair Windows. Was this page useful? Adding a new hard drive to a computer that already has Windows installed on it may cause the NTLDR error to occur. http://smartnewsolutions.com/ntldr-is/ntldr-is-missing-how-to-fix-on-xp.html If you are unsure if the new drive is blank, try booting from a bootable diskette and format the new hard drive.
Note: This error has also been known to occur when a memory card is in a card reader and the computer is attempting to boot from it. Ntldr Is Missing Windows 8 If the issue continues, it is also a possibility that the computer has a faulty cable, try replacing the hard drive cable with another cable or a new cable. If you have any card reader or flash reader, make sure that no memory stick is inside the reader.
Boot the computer with a Windows 95, Windows 98 or Windows ME bootable diskette. For example, if you are attempting to run the install from the CD-ROM, make sure the CD-ROM is the first device listed in the boot sequence, instead of the hard drive. Corrupt NTLDR or NTDETECT.COM file Windows 2000 users Windows XP users Windows 2000 users If your computer is using Microsoft Windows 2000 and you are encountering the NTLDR error, create the Ntldr Is Missing Vista Verify the jumpers are set properly on the CD-ROM drive.
Additionally, disconnect all USB drives, cameras, ipods, iphones, etc. NTLDR is Missing Press any key to restart Boot: Couldn't find NTLDR Please insert another disk NTLDR is missing Press Ctrl Alt Del to Restart Computer is booting from a non-bootable Enter that password. this content In the example below, we are copying these files from the CD-ROM drive letter, which in this case is "e." This letter may be different on your computer.
Improper settings can cause this error. Note: If you are not receiving the above message and your BIOS boot options are set properly, it's also possible that your CD-ROM drive may not be booting from the CD When prompted to press any key to boot from the CD, press any key on the keyboard. New hard drive being added If you are attempting to add a new hard drive to the computer, make sure the drive is a blank drive.